You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
98 lines
4.4 KiB
98 lines
4.4 KiB
[general] |
|
; The reaper thread will check every 5 seconds for exited clients, for config file changes, and for the CPU/iGPU power balance |
|
reaper_freq=5 |
|
|
|
; The desired governor is used when entering GameMode instead of "performance" |
|
desiredgov=performance |
|
;desiredgov=powersave |
|
; The default governer is used when leaving GameMode instead of restoring the original value |
|
defaultgov=powersave |
|
|
|
; The iGPU desired governor is used when the integrated GPU is under heavy load |
|
igpu_desiredgov=powersave |
|
; Threshold to use to decide when the integrated GPU is under heavy load. |
|
; This is a ratio of iGPU Watts / CPU Watts which is used to determine when the |
|
; integraged GPU is under heavy enough load to justify switching to |
|
; igpu_desiredgov. Set this to -1 to disable all iGPU checking and always |
|
; use desiredgov for games. |
|
igpu_power_threshold=0.3 |
|
|
|
; GameMode can change the scheduler policy to SCHED_ISO on kernels which support it (currently |
|
; not supported by upstream kernels). Can be set to "auto", "on" or "off". "auto" will enable |
|
; with 4 or more CPU cores. "on" will always enable. Defaults to "off". |
|
softrealtime=off |
|
|
|
; GameMode can renice game processes. You can put any value between 0 and 20 here, the value |
|
; will be negated and applied as a nice value (0 means no change). Defaults to 0. |
|
renice=4 |
|
|
|
; By default, GameMode adjusts the iopriority of clients to BE/0, you can put any value |
|
; between 0 and 7 here (with 0 being highest priority), or one of the special values |
|
; "off" (to disable) or "reset" (to restore Linux default behavior based on CPU priority), |
|
; currently, only the best-effort class is supported thus you cannot set it here |
|
ioprio=0 |
|
|
|
; Sets whether gamemode will inhibit the screensaver when active |
|
; Defaults to 1 |
|
inhibit_screensaver=1 |
|
|
|
[filter] |
|
; If "whitelist" entry has a value(s) |
|
; gamemode will reject anything not in the whitelist |
|
;whitelist=RiseOfTheTombRaider |
|
|
|
; Gamemode will always reject anything in the blacklist |
|
;blacklist=HalfLife3 |
|
; glxgears |
|
|
|
[gpu] |
|
; Here Be Dragons! |
|
; Warning: Use these settings at your own risk |
|
; Any damage to hardware incurred due to this feature is your responsibility and yours alone |
|
; It is also highly recommended you try these settings out first manually to find the sweet spots |
|
|
|
; Setting this to the keyphrase "accept-responsibility" will allow gamemode to apply GPU optimisations such as overclocks |
|
;apply_gpu_optimisations=accept-responsibility |
|
|
|
; The DRM device number on the system (usually 0), ie. the number in /sys/class/drm/card0/ |
|
;gpu_device=0 |
|
|
|
; Nvidia specific settings |
|
; Requires the coolbits extension activated in nvidia-xconfig |
|
; This corresponds to the desired GPUPowerMizerMode |
|
; "Adaptive"=0 "Prefer Maximum Performance"=1 and "Auto"=2 |
|
; See NV_CTRL_GPU_POWER_MIZER_MODE and friends in https://github.com/NVIDIA/nvidia-settings/blob/master/src/libXNVCtrl/NVCtrl.h |
|
;nv_powermizer_mode=1 |
|
|
|
; These will modify the core and mem clocks of the highest perf state in the Nvidia PowerMizer |
|
; They are measured as Mhz offsets from the baseline, 0 will reset values to default, -1 or unset will not modify values |
|
;nv_core_clock_mhz_offset=0 |
|
;nv_mem_clock_mhz_offset=0 |
|
|
|
; AMD specific settings |
|
; Requires a relatively up to date AMDGPU kernel module |
|
; See: https://dri.freedesktop.org/docs/drm/gpu/amdgpu.html#gpu-power-thermal-controls-and-monitoring |
|
; It is also highly recommended you use lm-sensors (or other available tools) to verify card temperatures |
|
; This corresponds to power_dpm_force_performance_level, "manual" is not supported for now |
|
;amd_performance_level=high |
|
|
|
[supervisor] |
|
; This section controls the new gamemode functions gamemode_request_start_for and gamemode_request_end_for |
|
; The whilelist and blacklist control which supervisor programs are allowed to make the above requests |
|
;supervisor_whitelist= |
|
;supervisor_blacklist= |
|
|
|
; In case you want to allow a supervisor to take full control of gamemode, this option can be set |
|
; This will only allow gamemode clients to be registered by using the above functions by a supervisor client |
|
;require_supervisor=0 |
|
|
|
[custom] |
|
; Custom scripts (executed using the shell) when gamemode starts and ends |
|
;start=notify-send "Yeaha GameMode started" |
|
start=sh ~/Scripts/gamemode-start.sh |
|
|
|
;end=notify-send "Uff GameMode ended" |
|
; /home/me/bin/start_ethmining.sh |
|
end=sh ~/Scripts/gamemode-end.sh |
|
; Timeout for scripts (seconds). Scripts will be killed if they do not complete within this time. |
|
;script_timeout=10 |