first push

README.md

@@ -0,0 +1,15 @@
+# ArcoLinuxIso Carli-9
+
+Start building your own carli version with 
+
+sudo ./build.sh -v
+
+To be able to build you install this package
+
+sudo pacman -S archiso
+
+To do : next - change name Arch Linux to Carli
+
+Do check out the archiso.readme.
+
+Use the correct version of archiso.

airootfs/etc/hostname

@@ -0,0 +1,3 @@
+#
+# SPDX-License-Identifier: GPL-3.0-or-later
+carli

airootfs/etc/locale.conf

@@ -0,0 +1,4 @@
+#
+# SPDX-License-Identifier: GPL-3.0-or-later
+
+LANG=en_US.UTF-8

airootfs/etc/localtime

@@ -0,0 +1 @@
+/usr/share/zoneinfo/UTC

airootfs/etc/mkinitcpio.conf

@@ -0,0 +1,70 @@
+#
+# SPDX-License-Identifier: GPL-3.0-or-later
+
+# vim:set ft=sh
+# MODULES
+# The following modules are loaded before any boot hooks are
+# run.  Advanced users may wish to specify all system modules
+# in this array.  For instance:
+#     MODULES=(piix ide_disk reiserfs)
+MODULES=()
+
+# BINARIES
+# This setting includes any additional binaries a given user may
+# wish into the CPIO image.  This is run last, so it may be used to
+# override the actual binaries included by a given hook
+# BINARIES are dependency parsed, so you may safely ignore libraries
+BINARIES=()
+
+# FILES
+# This setting is similar to BINARIES above, however, files are added
+# as-is and are not parsed in any way.  This is useful for config files.
+FILES=()
+
+# HOOKS
+# This is the most important setting in this file.  The HOOKS control the
+# modules and scripts added to the image, and what happens at boot time.
+# Order is important, and it is recommended that you do not change the
+# order in which HOOKS are added.  Run 'mkinitcpio -H <hook name>' for
+# help on a given hook.
+# 'base' is _required_ unless you know precisely what you are doing.
+# 'udev' is _required_ in order to automatically load modules
+# 'filesystems' is _required_ unless you specify your fs modules in MODULES
+# Examples:
+##   This setup specifies all modules in the MODULES setting above.
+##   No raid, lvm2, or encrypted root is needed.
+#    HOOKS=(base)
+#
+##   This setup will autodetect all modules for your system and should
+##   work as a sane default
+#    HOOKS=(base udev autodetect block filesystems)
+#
+##   This setup will generate a 'full' image which supports most systems.
+##   No autodetection is done.
+#    HOOKS=(base udev block filesystems)
+#
+##   This setup assembles a pata mdadm array with an encrypted root FS.
+##   Note: See 'mkinitcpio -H mdadm' for more information on raid devices.
+#    HOOKS=(base udev block mdadm encrypt filesystems)
+#
+##   This setup loads an lvm2 volume group on a usb device.
+#    HOOKS=(base udev block lvm2 filesystems)
+#
+##   NOTE: If you have /usr on a separate partition, you MUST include the
+#    usr, fsck and shutdown hooks.
+HOOKS=(base udev modconf memdisk archiso_shutdown archiso archiso_loop_mnt archiso_pxe_common archiso_pxe_nbd archiso_pxe_http archiso_pxe_nfs archiso_kms block filesystems keyboard)
+
+# COMPRESSION
+# Use this to compress the initramfs image. By default, gzip compression
+# is used. Use 'cat' to create an uncompressed image.
+#COMPRESSION="gzip"
+#COMPRESSION="bzip2"
+#COMPRESSION="lzma"
+COMPRESSION="xz"
+#COMPRESSION="lzop"
+#COMPRESSION="lz4"
+#COMPRESSION="zstd"
+
+# COMPRESSION_OPTIONS
+# Additional options for the compressor
+#COMPRESSION_OPTIONS=()

airootfs/etc/mkinitcpio.d/carli

@@ -0,0 +1,14 @@
+# mkinitcpio preset file for the 'linux' package on archiso
+
+PRESETS=('default' 'fallback')
+
+ALL_kver='/boot/vmlinuz-linux'
+ALL_config='/etc/mkinitcpio.conf'
+
+#default_config="/etc/mkinitcpio.conf"
+default_image="/boot/initramfs-linux.img"
+#default_options=""
+
+#fallback_config="/etc/mkinitcpio.conf"
+fallback_image="/boot/initramfs-linux-fallback.img"
+fallback_options="-S autodetect"

airootfs/etc/mkinitcpio.d/linux.preset

@@ -0,0 +1,11 @@
+#
+# SPDX-License-Identifier: GPL-3.0-or-later
+
+# mkinitcpio preset file for the 'linux' package on archiso
+
+PRESETS=('archiso')
+
+ALL_kver='/boot/vmlinuz-linux'
+ALL_config='/etc/mkinitcpio.conf'
+
+archiso_image="/boot/initramfs-linux.img"

airootfs/etc/modprobe.d/broadcom-wl.conf

@@ -0,0 +1,7 @@
+# The broadcom-wl package requires some modules to be disabled in order to use
+# wl. Since the ISO image needs to cover many hardware cases, this file
+# overrides the default blacklist in /usr/lib/modprobe.d/
+#
+# If you need to use wl, you may need to delete this file, then `rmmod` any
+# already-loaded modules that are now blacklisted before proceeding to modprobe
+# wl itself.

airootfs/etc/motd

@@ -0,0 +1,9 @@
+To install Arch Linux follow the installation guide:
+https://wiki.archlinux.org/index.php/Installation_guide
+
+For Wi-Fi, authenticate to the wireless network using the iwctl utility.
+Ethernet and Wi-Fi connections using DHCP should work automatically.
+
+After connecting to the internet, the installation guide can be accessed
+via the convenience script Installation_guide.
+

airootfs/etc/pacman.conf

@@ -0,0 +1,106 @@
+#
+# /etc/pacman.conf
+#
+# See the pacman.conf(5) manpage for option and repository directives
+#
+# SPDX-License-Identifier: GPL-3.0-or-later
+
+#
+# GENERAL OPTIONS
+#
+[options]
+# The following paths are commented out with their default values listed.
+# If you wish to use different paths, uncomment and update the paths.
+#RootDir     = /
+#DBPath      = /var/lib/pacman/
+#CacheDir    = /var/cache/pacman/pkg/
+#LogFile     = /var/log/pacman.log
+#GPGDir      = /etc/pacman.d/gnupg/
+#HookDir     = /etc/pacman.d/hooks/
+HoldPkg     = pacman glibc
+#XferCommand = /usr/bin/curl -L -C - -f -o %o %u
+#XferCommand = /usr/bin/wget --passive-ftp -c -O %o %u
+#CleanMethod = KeepInstalled
+Architecture = auto
+
+# Pacman won't upgrade packages listed in IgnorePkg and members of IgnoreGroup
+#IgnorePkg   =
+#IgnoreGroup =
+
+#NoUpgrade   =
+#NoExtract   =
+
+# Misc options
+#UseSyslog
+#Color
+#TotalDownload
+# We cannot check disk space from within a chroot environment
+#CheckSpace
+#VerbosePkgLists
+
+# By default, pacman accepts packages signed by keys that its local keyring
+# trusts (see pacman-key and its man page), as well as unsigned packages.
+SigLevel    = Required DatabaseOptional
+LocalFileSigLevel = Optional
+#RemoteFileSigLevel = Required
+
+# NOTE: You must run `pacman-key --init` before first using pacman; the local
+# keyring can then be populated with the keys of all official Arch Linux
+# packagers with `pacman-key --populate archlinux`.
+
+#
+# REPOSITORIES
+#   - can be defined here or included from another file
+#   - pacman will search repositories in the order defined here
+#   - local/custom mirrors can be added here or in separate files
+#   - repositories listed first will take precedence when packages
+#     have identical names, regardless of version number
+#   - URLs will have $repo replaced by the name of the current repo
+#   - URLs will have $arch replaced by the name of the architecture
+#
+# Repository entries are of the format:
+#       [repo-name]
+#       Server = ServerName
+#       Include = IncludePath
+#
+# The header [repo-name] is crucial - it must be present and
+# uncommented to enable the repo.
+#
+
+# The testing repositories are disabled by default. To enable, uncomment the
+# repo name header and Include lines. You can add preferred servers immediately
+# after the header, and they will be used before the default mirrors.
+
+#[testing]
+#Include = /etc/pacman.d/mirrorlist
+
+[core]
+Include = /etc/pacman.d/mirrorlist
+
+[extra]
+Include = /etc/pacman.d/mirrorlist
+
+#[community-testing]
+#Include = /etc/pacman.d/mirrorlist
+
+[community]
+Include = /etc/pacman.d/mirrorlist
+
+# If you want to run 32 bit applications on your x86_64 system,
+# enable the multilib repositories as required here.
+
+#[multilib-testing]
+#Include = /etc/pacman.d/mirrorlist
+
+#[multilib]
+#Include = /etc/pacman.d/mirrorlist
+
+# An example of a custom package repository.  See the pacman manpage for
+# tips on creating your own repositories.
+#[custom]
+#SigLevel = Optional TrustAll
+#Server = file:///home/custompkgs
+
+[carli_repo]
+SigLevel = Required DatabaseOptional
+Server = https://arcolinuxiso.github.io/$repo/$arch

airootfs/etc/passwd

@@ -0,0 +1 @@
+root:x:0:0:root:/root:/usr/bin/zsh

airootfs/etc/resolv.conf

@@ -0,0 +1 @@
+/run/systemd/resolve/stub-resolv.conf

airootfs/etc/sddm.conf.d/autologin.conf

@@ -0,0 +1,7 @@
+[Autologin]
+Relogin=false
+User=liveuser
+Session=plasma
+
+[Theme]
+Current=breeze

airootfs/etc/shadow

@@ -0,0 +1 @@
+root::14871::::::

airootfs/etc/ssh/sshd_config

@@ -0,0 +1,116 @@
+#	$OpenBSD: sshd_config,v 1.103 2018/04/09 20:41:22 tj Exp $
+
+# This is the sshd server system-wide configuration file.  See
+# sshd_config(5) for more information.
+
+# This sshd was compiled with PATH=/usr/local/sbin:/usr/local/bin:/usr/bin
+
+# The strategy used for options in the default sshd_config shipped with
+# OpenSSH is to specify options with their default value where
+# possible, but leave them commented.  Uncommented options override the
+# default value.
+
+#Port 22
+#AddressFamily any
+#ListenAddress 0.0.0.0
+#ListenAddress ::
+
+#HostKey /etc/ssh/ssh_host_rsa_key
+#HostKey /etc/ssh/ssh_host_ecdsa_key
+#HostKey /etc/ssh/ssh_host_ed25519_key
+
+# Ciphers and keying
+#RekeyLimit default none
+
+# Logging
+#SyslogFacility AUTH
+#LogLevel INFO
+
+# Authentication:
+
+#LoginGraceTime 2m
+PermitRootLogin yes
+#StrictModes yes
+#MaxAuthTries 6
+#MaxSessions 10
+
+#PubkeyAuthentication yes
+
+# The default is to check both .ssh/authorized_keys and .ssh/authorized_keys2
+# but this is overridden so installations will only check .ssh/authorized_keys
+AuthorizedKeysFile	.ssh/authorized_keys
+
+#AuthorizedPrincipalsFile none
+
+#AuthorizedKeysCommand none
+#AuthorizedKeysCommandUser nobody
+
+# For this to work you will also need host keys in /etc/ssh/ssh_known_hosts
+#HostbasedAuthentication no
+# Change to yes if you don't trust ~/.ssh/known_hosts for
+# HostbasedAuthentication
+#IgnoreUserKnownHosts no
+# Don't read the user's ~/.rhosts and ~/.shosts files
+#IgnoreRhosts yes
+
+# To disable tunneled clear text passwords, change to no here!
+#PasswordAuthentication yes
+#PermitEmptyPasswords no
+
+# Change to no to disable s/key passwords
+ChallengeResponseAuthentication no
+
+# Kerberos options
+#KerberosAuthentication no
+#KerberosOrLocalPasswd yes
+#KerberosTicketCleanup yes
+#KerberosGetAFSToken no
+
+# GSSAPI options
+#GSSAPIAuthentication no
+#GSSAPICleanupCredentials yes
+
+# Set this to 'yes' to enable PAM authentication, account processing,
+# and session processing. If this is enabled, PAM authentication will
+# be allowed through the ChallengeResponseAuthentication and
+# PasswordAuthentication.  Depending on your PAM configuration,
+# PAM authentication via ChallengeResponseAuthentication may bypass
+# the setting of "PermitRootLogin without-password".
+# If you just want the PAM account and session checks to run without
+# PAM authentication, then enable this but set PasswordAuthentication
+# and ChallengeResponseAuthentication to 'no'.
+UsePAM yes
+
+#AllowAgentForwarding yes
+#AllowTcpForwarding yes
+#GatewayPorts no
+#X11Forwarding no
+#X11DisplayOffset 10
+#X11UseLocalhost yes
+#PermitTTY yes
+PrintMotd no # pam does that
+#PrintLastLog yes
+#TCPKeepAlive yes
+#PermitUserEnvironment no
+#Compression delayed
+#ClientAliveInterval 0
+#ClientAliveCountMax 3
+#UseDNS no
+#PidFile /run/sshd.pid
+#MaxStartups 10:30:100
+#PermitTunnel no
+#ChrootDirectory none
+#VersionAddendum none
+
+# no default banner path
+#Banner none
+
+# override default of no subsystems
+Subsystem	sftp	/usr/lib/ssh/sftp-server
+
+# Example of overriding settings on a per-user basis
+#Match User anoncvs
+#	X11Forwarding no
+#	AllowTcpForwarding no
+#	PermitTTY no
+#	ForceCommand cvs server

airootfs/etc/sudoers.d/g_wheel

@@ -0,0 +1 @@
+%wheel ALL=(ALL) NOPASSWD: ALL

airootfs/etc/systemd/journald.conf.d/volatile-storage.conf

@@ -0,0 +1,5 @@
+#
+# SPDX-License-Identifier: GPL-3.0-or-later
+
+[Journal]
+Storage=volatile

airootfs/etc/systemd/logind.conf.d/do-not-suspend.conf

@@ -0,0 +1,7 @@
+#
+# SPDX-License-Identifier: GPL-3.0-or-later
+
+[Login]
+HandleSuspendKey=ignore
+HandleHibernateKey=ignore
+HandleLidSwitch=ignore

airootfs/etc/systemd/network/20-ethernet.network

@@ -0,0 +1,13 @@
+#
+# SPDX-License-Identifier: GPL-3.0-or-later
+
+[Match]
+Name=en*
+Name=eth*
+
+[Network]
+DHCP=yes
+IPv6PrivacyExtensions=yes
+
+[DHCP]
+RouteMetric=512

airootfs/etc/systemd/network/20-wireless.network

@@ -0,0 +1,13 @@
+#
+# SPDX-License-Identifier: GPL-3.0-or-later
+
+[Match]
+Name=wlp*
+Name=wlan*
+
+[Network]
+DHCP=yes
+IPv6PrivacyExtensions=yes
+
+[DHCP]
+RouteMetric=1024

airootfs/etc/systemd/system/choose-mirror.service

@@ -0,0 +1,13 @@
+#
+# SPDX-License-Identifier: GPL-3.0-or-later
+
+[Unit]
+Description=Choose mirror from the kernel command line
+ConditionKernelCommandLine=mirror
+
+[Service]
+Type=oneshot
+ExecStart=/usr/local/bin/choose-mirror
+
+[Install]
+WantedBy=multi-user.target

airootfs/etc/systemd/system/dbus-org.freedesktop.network1.service

@@ -0,0 +1 @@
+/usr/lib/systemd/system/systemd-networkd.service

airootfs/etc/systemd/system/dbus-org.freedesktop.resolve1.service

@@ -0,0 +1 @@
+/usr/lib/systemd/system/systemd-resolved.service

airootfs/etc/systemd/system/etc-pacman.d-gnupg.mount

@@ -0,0 +1,11 @@
+#
+# SPDX-License-Identifier: GPL-3.0-or-later
+
+[Unit]
+Description=Temporary /etc/pacman.d/gnupg directory
+
+[Mount]
+What=tmpfs
+Where=/etc/pacman.d/gnupg
+Type=tmpfs
+Options=mode=0755

airootfs/etc/systemd/system/getty@tty1.service.d/autologin.conf

@@ -0,0 +1,6 @@
+#
+# SPDX-License-Identifier: GPL-3.0-or-later
+
+[Service]
+ExecStart=
+ExecStart=-/sbin/agetty --autologin root --noclear %I 38400 linux

airootfs/etc/systemd/system/livecd-alsa-unmuter.service

@@ -0,0 +1,16 @@
+#
+# SPDX-License-Identifier: GPL-3.0-or-later
+
+[Unit]
+Description=Unmute All Sound Card Controls For Use With The Live Arch Environment
+# This needs to run after the audio device becomes available.
+Wants=systemd-udev-settle.service
+After=systemd-udev-settle.service sound.target
+ConditionKernelCommandLine=accessibility=on
+
+[Service]
+Type=oneshot
+ExecStart=/usr/local/bin/livecd-sound -u
+
+[Install]
+WantedBy=sound.target

airootfs/etc/systemd/system/livecd-talk.service

@@ -0,0 +1,23 @@
+#
+# SPDX-License-Identifier: GPL-3.0-or-later
+
+[Unit]
+Description=Screen reader service
+After=livecd-alsa-unmuter.service
+Before=getty@tty1.service
+ConditionKernelCommandLine=accessibility=on
+
+[Service]
+Type=oneshot
+TTYPath=/dev/tty13
+ExecStartPre=/usr/bin/chvt 13
+ExecStart=/usr/local/bin/livecd-sound -p
+ExecStartPost=/usr/bin/chvt 1
+ExecStartPost=systemctl start espeakup.service
+StandardInput=tty
+TTYVHangup=yes
+TTYVTDisallocate=yes
+RemainAfterExit=true
+
+[Install]
+WantedBy=multi-user.target

airootfs/etc/systemd/system/multi-user.target.wants/choose-mirror.service

@@ -0,0 +1 @@
+../choose-mirror.service

airootfs/etc/systemd/system/multi-user.target.wants/iwd.service

@@ -0,0 +1 @@
+/usr/lib/systemd/system/iwd.service

airootfs/etc/systemd/system/multi-user.target.wants/livecd-talk.service

@@ -0,0 +1 @@
+/etc/systemd/system/livecd-talk.service

airootfs/etc/systemd/system/multi-user.target.wants/pacman-init.service

@@ -0,0 +1 @@
+../pacman-init.service

airootfs/etc/systemd/system/multi-user.target.wants/reflector.service

@@ -0,0 +1 @@
+/usr/lib/systemd/system/reflector.service

airootfs/etc/systemd/system/multi-user.target.wants/systemd-networkd.service

@@ -0,0 +1 @@
+/usr/lib/systemd/system/systemd-networkd.service

airootfs/etc/systemd/system/multi-user.target.wants/systemd-resolved.service

@@ -0,0 +1 @@
+/usr/lib/systemd/system/systemd-resolved.service

airootfs/etc/systemd/system/network-online.target.wants/systemd-networkd-wait-online.service

@@ -0,0 +1 @@
+/usr/lib/systemd/system/systemd-networkd-wait-online.service

airootfs/etc/systemd/system/pacman-init.service

@@ -0,0 +1,19 @@
+#
+# SPDX-License-Identifier: GPL-3.0-or-later
+
+[Unit]
+Description=Initializes Pacman keyring
+Wants=haveged.service
+After=haveged.service
+Requires=etc-pacman.d-gnupg.mount
+After=etc-pacman.d-gnupg.mount
+
+[Service]
+Type=oneshot
+RemainAfterExit=yes
+ExecStart=/usr/bin/pacman-key --init
+ExecStart=/usr/bin/pacman-key --populate archlinux carli
+ExecStart=/usr/bin/pacman-key --lsign-key 4030B8368D944C9C
+
+[Install]
+WantedBy=multi-user.target

airootfs/etc/systemd/system/reflector.service.d/archiso.conf

@@ -0,0 +1,6 @@
+[Unit]
+ConditionKernelCommandLine=!mirror
+
+[Service]
+Restart=on-failure
+RestartSec=10

airootfs/etc/systemd/system/sockets.target.wants/systemd-networkd.socket

@@ -0,0 +1 @@
+/usr/lib/systemd/system/systemd-networkd.socket

airootfs/etc/systemd/system/sound.target.wants/livecd-alsa-unmuter.service

@@ -0,0 +1 @@
+../livecd-alsa-unmuter.service

airootfs/etc/systemd/system/systemd-networkd-wait-online.service.d/wait-for-only-one-interface.conf

@@ -0,0 +1,6 @@
+#
+# SPDX-License-Identifier: GPL-3.0-or-later
+
+[Service]
+ExecStart=
+ExecStart=/usr/lib/systemd/systemd-networkd-wait-online --any

airootfs/etc/xdg/reflector/reflector.conf

@@ -0,0 +1,6 @@
+# Reflector configuration file for the systemd service.
+
+--save /etc/pacman.d/mirrorlist
+--protocol https
+--latest 70
+--sort rate

airootfs/root/.automated_script.sh

@@ -0,0 +1,34 @@
+#!/usr/bin/env bash
+
+script_cmdline ()
+{
+    local param
+    for param in $(< /proc/cmdline); do
+        case "${param}" in
+            script=*) echo "${param#*=}" ; return 0 ;;
+        esac
+    done
+}
+
+automated_script ()
+{
+    local script rt
+    script="$(script_cmdline)"
+    if [[ -n "${script}" && ! -x /tmp/startup_script ]]; then
+        if [[ "${script}" =~ ^((http|https|ftp)://) ]]; then
+            curl "${script}" --retry-connrefused -s -o /tmp/startup_script >/dev/null
+            rt=$?
+        else
+            cp "${script}" /tmp/startup_script
+            rt=$?
+        fi
+        if [[ ${rt} -eq 0 ]]; then
+            chmod +x /tmp/startup_script
+            /tmp/startup_script
+        fi
+    fi
+}
+
+if [[ $(tty) == "/dev/tty1" ]]; then
+    automated_script
+fi

airootfs/root/.zlogin

@@ -0,0 +1,6 @@
+# fix for screen readers
+if grep -Fq 'accessibility=' /proc/cmdline &> /dev/null; then
+    setopt SINGLE_LINE_ZLE
+fi
+
+~/.automated_script.sh

airootfs/root/customize_airootfs.sh

@@ -0,0 +1,43 @@
+#!/usr/bin/env bash
+#
+# SPDX-License-Identifier: GPL-3.0-or-later
+
+set -e -u
+
+# Warning: customize_airootfs.sh is deprecated! Support for it will be removed in a future archiso version.
+
+sed -i 's/#\(en_US\.UTF-8\)/\1/' /etc/locale.gen
+locale-gen
+
+ln -sf /usr/share/zoneinfo/UTC /etc/localtime
+
+usermod -s /usr/bin/zsh root
+cp -aT /etc/skel/ /root/
+chmod 700 /root
+# unset the root password
+passwd -d root
+
+sed -i 's/#\(PermitRootLogin \).\+/\1yes/' /etc/ssh/sshd_config
+sed -i "s/#Server/Server/g" /etc/pacman.d/mirrorlist
+sed -i 's/#\(Storage=\)auto/\1volatile/' /etc/systemd/journald.conf
+
+sed -i 's/#\(HandleSuspendKey=\)suspend/\1ignore/' /etc/systemd/logind.conf
+sed -i 's/#\(HandleHibernateKey=\)hibernate/\1ignore/' /etc/systemd/logind.conf
+sed -i 's/#\(HandleLidSwitch=\)suspend/\1ignore/' /etc/systemd/logind.conf
+
+systemctl enable pacman-init.service choose-mirror.service systemd-networkd.service systemd-resolved.service
+systemctl set-default graphical.target
+systemctl enable sddm.service
+
+pacman-key --init
+pacman-key --populate archlinux carli
+pacman-key --lsign-key 7B01FA17CA801345
+
+groupscarli="adm,audio,disk,floppy,log,network,optical,rfkill,storage,video,wheel,sys"
+useradd -m -g users -G $groupscarli -s /bin/bash liveuser
+passwd -d liveuser
+
+#set permissions
+chmod 750 /etc/sudoers.d
+chmod 750 /etc/polkit-1/rules.d
+chgrp polkitd /etc/polkit-1/rules.d

airootfs/usr/local/bin/Installation_guide

@@ -0,0 +1,5 @@
+#!/bin/sh
+#
+# SPDX-License-Identifier: GPL-3.0-or-later
+
+exec lynx 'https://wiki.archlinux.org/index.php/Installation_guide'

airootfs/usr/local/bin/choose-mirror

@@ -0,0 +1,28 @@
+#!/bin/bash
+#
+# SPDX-License-Identifier: GPL-3.0-or-later
+
+get_cmdline() {
+    local param
+    for param in $(< /proc/cmdline); do
+        case "${param}" in
+            $1=*) echo "${param##*=}";
+            return 0
+            ;;
+        esac
+    done
+}
+
+mirror=$(get_cmdline mirror)
+[[ $mirror = auto ]] && mirror=$(get_cmdline archiso_http_srv)
+[[ $mirror ]] || exit 0
+
+mv /etc/pacman.d/mirrorlist /etc/pacman.d/mirrorlist.orig
+cat >/etc/pacman.d/mirrorlist << EOF
+#
+# Arch Linux repository mirrorlist
+# Generated by archiso
+#
+
+Server = ${mirror%%/}/\$repo/os/\$arch
+EOF

airootfs/usr/local/bin/livecd-sound

@@ -0,0 +1,248 @@
+#!/usr/bin/env bash
+#
+# SPDX-License-Identifier: GPL-3.0-or-later
+
+usage() {
+    cat <<- _EOF_
+    live cd sound helper script.
+    Usage: livecdsound [OPTION]
+    OPTIONS
+        -u, --unmute      unmute all sound cards
+        -p, --pick        select a card for  speetch output
+        -h, --help        Show this usage message
+
+_EOF_
+}
+
+bugout () {
+    printf "/usr/local/bin/livecdsound: programming error"
+    stat_fail
+}
+
+echo_card_indices()
+{
+    if [ -f /proc/asound/cards ] ; then
+        sed -n -e's/^[[:space:]]*\([0-7]\)[[:space:]].*/\1/p' /proc/asound/cards
+    fi
+}
+
+# The following functions try to set many controls.
+# No card has all the controls and so some of the attempts are bound to fail.
+# Because of this, the functions can't return useful status values.
+
+# $1 <card id>
+# $2 <control>
+# $3 <level>
+unmute_and_set_level(){
+    { [ "$3" ] &&[ "$2" ] && [ "$1" ] ; } || bugout
+    systemd-cat -t "livecdsound" printf "Setting: %s on card: %s to %s\n" "$2" "$1" "$3"
+    systemd-cat -t "livecdsound" amixer -c "$1" set "$2" "$3" unmute
+    return 0
+}
+
+# $1 <card id>
+# $2 <control>
+mute_and_zero_level()
+{
+    { [ "$1" ] && [ "$2" ] ; } || bugout
+    systemd-cat -t "livecdsound" printf "Muting control: %s on card: %s\n" "$2" "$1"
+    systemd-cat -t "livecdsound" amixer -c "$1" set "$2" "0%" mute
+    return 0
+}
+
+# $1 <card ID>
+# $2 <control>
+# $3 "on" | "off"
+switch_control()
+{
+    { [ "$3" ] && [ "$1" ] ; } || bugout
+    systemd-cat -t "livecdsound" printf "Switching control: %s on card: %s to %s\n" "$2" "$1" "$3"
+    systemd-cat -t "livecdsound" amixer -c "$1" set "$2" "$3"
+    return 0
+}
+
+# $1 <card ID>
+sanify_levels_on_card()
+{
+    unmute_and_set_level "$1" "Front" "80%"
+    unmute_and_set_level "$1" "Master" "80%"
+    unmute_and_set_level "$1" "Master Mono" "80%"
+    unmute_and_set_level "$1" "Master Digital" "80%"   # E.g., cs4237B
+    unmute_and_set_level "$1" "Playback" "80%"
+    unmute_and_set_level "$1" "Headphone" "100%"
+    unmute_and_set_level "$1" "PCM" "80%"
+    unmute_and_set_level "$1" "PCM,1" "80%"   # E.g., ess1969
+    unmute_and_set_level "$1" "DAC" "80%"     # E.g., envy24, cs46xx
+    unmute_and_set_level "$1" "DAC,0" "80%"   # E.g., envy24
+    unmute_and_set_level "$1" "DAC,1" "80%"   # E.g., envy24
+    unmute_and_set_level "$1" "Synth" "80%"
+    unmute_and_set_level "$1" "CD" "80%"
+    unmute_and_set_level "$1" "PC Speaker" "100%"
+
+    mute_and_zero_level "$1" "Mic"
+    mute_and_zero_level "$1" "IEC958"         # Ubuntu #19648
+
+    # Intel P4P800-MX
+    switch_control "$1" "Master Playback Switch" on
+    switch_control "$1" "Master Surround" on
+
+    # Trident/YMFPCI/emu10k1:
+    unmute_and_set_level "$1" "Wave" "80%"
+    unmute_and_set_level "$1" "Music" "80%"
+    unmute_and_set_level "$1" "AC97" "80%"
+
+    # DRC:
+    unmute_and_set_level "$1" "Dynamic Range Compression" "80%"
+
+    # Required for HDA Intel (hda-intel):
+    unmute_and_set_level "$1" "Front" "80%"
+
+    # Required for SB Live 7.1/24-bit (ca0106):
+    unmute_and_set_level "$1" "Analog Front" "80%"
+
+    # Required at least for Via 823x hardware on DFI K8M800-MLVF Motherboard
+    switch_control "$1" "IEC958 Capture Monitor" off
+
+    # Required for hardware allowing toggles for AC97 through IEC958,
+    #  valid values are 0, 1, 2, 3. Needs to be set to 0 for PCM1.
+    unmute_and_set_level "$1" "IEC958 Playback AC97-SPSA" "0"
+
+    # Required for newer Via hardware
+    unmute_and_set_level "$1" "VIA DXS,0" "80%"
+    unmute_and_set_level "$1" "VIA DXS,1" "80%"
+    unmute_and_set_level "$1" "VIA DXS,2" "80%"
+    unmute_and_set_level "$1" "VIA DXS,3" "80%"
+
+    # Required on some notebooks with ICH4:
+    switch_control "$1" "Headphone Jack Sense" off
+    switch_control "$1" "Line Jack Sense" off
+
+    # Some machines need one or more of these to be on;
+    # others need one or more of these to be off:
+
+    switch_control "$1" "Audigy Analog/Digital Output Jack" on
+    switch_control "$1" "SB Live Analog/Digital Output Jack" on
+
+    # D1984 -- Thinkpad T61/X61
+    switch_control "$1" "Speaker" on
+    switch_control "$1" "Headphone" on
+
+    # HDA-Intel w/ "Digital" capture mixer (See Ubuntu #193823)
+    unmute_and_set_level "$1" "Digital" "80%"
+
+    return 0
+}
+
+# $1 <card ID> | "all"
+sanify_levels()
+{
+    local ttsdml_returnstatus=0
+    local card
+    case "$1" in
+              all)
+        for card in $(echo_card_indices) ; do
+            sanify_levels_on_card "$card" || ttsdml_returnstatus=1
+        done
+        ;;
+      *)
+        sanify_levels_on_card "$1" || ttsdml_returnstatus=1
+        ;;
+    esac
+    return $ttsdml_returnstatus
+}
+
+# List all cards that *should* be usable for PCM audio.  In my experience,
+# the console speaker (handled by the pcsp driver) isn't a suitable playback
+# device, so we'll exclude it.
+list_non_pcsp_cards()
+{
+    for card in $(echo_card_indices); do
+        local cardfile="/proc/asound/card${card}/id"
+        if [ -r "$cardfile" ] && [ -f "$cardfile" ] && \
+            [ "$(cat "$cardfile")" != pcsp ]; then
+            echo "$card"
+        fi
+    done
+}
+
+# Properly initialize the sound card so that we have audio at boot.
+unmute_all_cards()
+{
+    sanify_levels all
+}
+
+is_numeric() {
+    local str=$1
+    [[ "$str" =~ ^[0-9]+$ ]]
+}
+
+set_default_card() {
+    local card=$1
+    sed -e "s/%card%/$card/g" < /usr/local/share/livecd-sound/asound.conf.in \
+        > /etc/asound.conf
+}
+
+play_on_card() {
+    local card=$1 file=$2
+    aplay -q "-Dplughw:$card,0" "$file"
+}
+
+# If there are multiple usable sound cards, prompt the user to choose one,
+# using auditory feedback.
+pick_a_card()
+{
+    set -f
+    usable_cards="$(list_non_pcsp_cards)"
+    num_usable_cards="$(wc -w <<< "$usable_cards")"
+
+    if [ "$num_usable_cards" -eq 1 ]; then
+        systemd-cat -t "livecdsound" printf "Only one sound card is detected\n"
+        exit 0
+    fi
+    systemd-cat -t "livecdsound" printf "multiple sound cards detected\n"
+    for card in $usable_cards; do
+        if ! is_numeric "$card"; then
+            continue
+        fi
+        play_on_card "$card" /usr/share/livecd-sounds/pick-a-card.wav&
+    done
+    wait
+    sleep 1
+    for card in $usable_cards; do
+        if ! is_numeric "$card"; then
+            continue
+    fi
+    play_on_card "$card" /usr/share/livecd-sounds/beep.wav
+    if read -r -t 10; then
+        systemd-cat -t "livecdsound" printf "Selecting %s sound card as default\n" "$card"
+        set_default_card "$card"
+        break
+    fi
+done
+}
+
+if [[  $# -eq 0 ]]; then
+    echo "error: No argument passed."
+    exit 1
+fi
+while [[ "${1}" != "" ]]; do
+    case ${1} in
+        -h|--help)
+            usage
+            exit
+            ;;
+        -u|--unmute)
+            systemd-cat -t "livecdsound" printf "Unmuting all cards"
+            unmute_all_cards
+            ;;
+        -p|--pick)
+            pick_a_card
+            ;;
+        *)
+            echo "error: Unsupported argument"
+            usage
+            exit 1
+            ;;
+    esac
+    shift
+done

airootfs/usr/local/share/livecd-sound/asound.conf.in

@@ -0,0 +1,3 @@
+Defaults node
+defaults.ctl.card %card%;
+defaults.pcm.card %card%;

archiso.readme

@@ -0,0 +1,28 @@
+You can build these isos if you have the right version of Archiso.
+
+Archiso is a package supplied by Arch Linux that is recently undergoing some major changes.
+
+You can follow up the versions via this link.
+
+https://www.archlinux.org/packages/extra/any/archiso/
+
+We are now using this version
+
+
+archiso-version=50-1.1
+
+
+sudo pacman -Q archiso and you will know your version
+
+
+Downgrade to this version via a command in the terminal if you have a higher version.
+
+downgrade archiso
+
+and choose the right version. 
+
+Add it to the ignore list of pacman.
+
+
+If you have a lower version then update your system. Check to see if archiso is not added to 
+your /etc/pacman.conf in the list of ignores. Delete it if it is in there. Then update.

build.sh

@@ -0,0 +1,7 @@
+#!/usr/bin/env bash
+#
+# SPDX-License-Identifier: GPL-3.0-or-later
+
+#printf '\n[%s] WARNING: %s\n\n' "mkarchiso" "build.sh scripts are deprecated! Please use mkarchiso directly." >&2
+_buildsh_path="$(realpath -- "$0")"
+exec mkarchiso "$@" "${_buildsh_path%/*}"

cleanup-v1.sh

@@ -0,0 +1,23 @@
+#!/bin/bash
+#set -e
+##################################################################################################################
+# Author 	: 	Erik Dubois
+# Website 	: 	https://www.erikdubois.be
+# Website	:	https://www.arcolinux.info
+# Website	:	https://www.arcolinux.com
+# Website	:	https://www.arcolinuxd.com
+# Website	:	https://www.arcolinuxforum.com
+##################################################################################################################
+#
+#   DO NOT JUST RUN THIS. EXAMINE AND JUDGE. RUN AT YOUR OWN RISK.
+#
+##################################################################################################################
+# change into your name and email.
+
+sudo rm -r out/
+sudo rm -r work/
+
+
+echo "################################################################"
+echo "###################    T H E   E N D      ######################"
+echo "################################################################"

efiboot/loader/entries/archiso-x86_64-linux.conf

@@ -0,0 +1,9 @@
+#
+# SPDX-License-Identifier: GPL-3.0-or-later
+
+title   Carli Linux install medium (x86_64, UEFI)
+linux   /%INSTALL_DIR%/boot/x86_64/vmlinuz-linux
+initrd  /%INSTALL_DIR%/boot/intel-ucode.img
+initrd  /%INSTALL_DIR%/boot/amd-ucode.img
+initrd  /%INSTALL_DIR%/boot/x86_64/initramfs-linux.img
+options archisobasedir=%INSTALL_DIR% archisolabel=%ARCHISO_LABEL%

efiboot/loader/entries/archiso-x86_64-speech-linux.conf

@@ -0,0 +1,9 @@
+#
+# SPDX-License-Identifier: GPL-3.0-or-later
+
+title   Arch Linux install medium (x86_64, UEFI) with speech
+linux   /%INSTALL_DIR%/boot/x86_64/vmlinuz-linux
+initrd  /%INSTALL_DIR%/boot/intel-ucode.img
+initrd  /%INSTALL_DIR%/boot/amd-ucode.img
+initrd  /%INSTALL_DIR%/boot/x86_64/initramfs-linux.img
+options archisobasedir=%INSTALL_DIR% archisolabel=%ARCHISO_LABEL% accessibility=on

efiboot/loader/loader.conf

@@ -0,0 +1,5 @@
+#
+# SPDX-License-Identifier: GPL-3.0-or-later
+
+timeout 15
+default archiso-x86_64-linux.conf

git-v2.sh

@@ -0,0 +1,45 @@
+#!/bin/bash
+#set -e
+##################################################################################################################
+# Author 	: 	Erik Dubois
+# Website 	: 	https://www.erikdubois.be
+# Website	:	https://www.arcolinux.info
+# Website	:	https://www.arcolinux.com
+# Website	:	https://www.arcolinuxd.com
+# Website	:	https://www.arcolinuxforum.com
+##################################################################################################################
+#
+#   DO NOT JUST RUN THIS. EXAMINE AND JUDGE. RUN AT YOUR OWN RISK.
+#
+##################################################################################################################
+# change a commit comment
+# git commit --amend -m "more info"
+# git push --force origin
+
+
+# checking if I have the latest files from github
+echo "Checking for newer files online first"
+git pull
+
+# Below command will backup everything inside the project folder
+git add --all .
+
+# Give a comment to the commit if you want
+echo "####################################"
+echo "Write your commit comment!"
+echo "####################################"
+
+read input
+
+# Committing to the local repository with a message containing the time details and commit text
+
+git commit -m "$input"
+
+# Push the local files to github
+
+git push -u origin master
+
+
+echo "################################################################"
+echo "###################    Git Push Done      ######################"
+echo "################################################################"

import-carli-key.sh

@@ -0,0 +1,24 @@
+#!/bin/bash
+#set -e
+##################################################################################################################
+# Author 	: 	Erik Dubois
+# Website 	: 	https://www.erikdubois.be
+# Website	:	https://www.arcolinux.info
+# Website	:	https://www.arcolinux.com
+# Website	:	https://www.arcolinuxd.com
+# Website	:	https://www.arcolinuxforum.com
+##################################################################################################################
+#
+#   DO NOT JUST RUN THIS. EXAMINE AND JUDGE. RUN AT YOUR OWN RISK.
+#
+##################################################################################################################
+
+echo "get the carli key in"
+sudo pacman-key --recv-keys 7B01FA17CA801345 --keyserver hkp://ipv4.pool.sks-keyservers.net:11371
+
+echo "Lsign the keys"
+sudo pacman-key --lsign-key 7B01FA17CA801345
+
+echo "################################################################"
+echo "###################        Done           ######################"
+echo "################################################################"

packages-cinnamon.x86_64

@@ -0,0 +1,123 @@
+#
+# SPDX-License-Identifier: GPL-3.0-or-later
+alsa-utils
+amd-ucode
+arch-install-scripts
+b43-fwcutter
+base
+bind-tools
+brltty
+broadcom-wl
+btrfs-progs
+clonezilla
+crda
+darkhttpd
+ddrescue
+dhclient
+dhcpcd
+diffutils
+dmraid
+dnsmasq
+dosfstools
+edk2-shell
+efibootmgr
+espeakup
+ethtool
+exfatprogs
+f2fs-tools
+fatresize
+fsarchiver
+gnu-netcat
+gpart
+gpm
+gptfdisk
+grml-zsh-config
+haveged
+hdparm
+intel-ucode
+ipw2100-fw
+ipw2200-fw
+irssi
+iwd
+jfsutils
+kitty-terminfo
+lftp
+linux
+linux-atm
+linux-firmware
+livecd-sounds
+lsscsi
+lvm2
+lynx
+man-db
+man-pages
+mc
+mdadm
+memtest86+
+mkinitcpio
+mkinitcpio-archiso
+mkinitcpio-nfs-utils
+mtools
+nano
+nbd
+ndisc6
+nfs-utils
+nilfs-utils
+nmap
+ntfs-3g
+nvme-cli
+openconnect
+openssh
+openvpn
+partclone
+parted
+partimage
+ppp
+pptpclient
+reflector
+reiserfsprogs
+rp-pppoe
+rsync
+rxvt-unicode-terminfo
+sdparm
+sg3_utils
+smartmontools
+squashfs-tools
+sudo
+syslinux
+systemd-resolvconf
+tcpdump
+terminus-font
+termite-terminfo
+testdisk
+tmux
+udftools
+usb_modeswitch
+usbutils
+vim
+vpnc
+wireless-regdb
+wireless_tools
+wpa_supplicant
+wvdial
+xfsprogs
+xl2tpd
+zsh
+
+#Carli
+sddm
+cinnamon
+nemo-fileroller
+gnome-terminal
+bash-completion
+
+#Calamares
+calamares
+carli-calamares-config
+grub
+
+#Software
+git
+base-devel
+yay-bin
+neofetch

packages-deepin.x86_64

@@ -0,0 +1,122 @@
+#
+# SPDX-License-Identifier: GPL-3.0-or-later
+alsa-utils
+amd-ucode
+arch-install-scripts
+b43-fwcutter
+base
+bind-tools
+brltty
+broadcom-wl
+btrfs-progs
+clonezilla
+crda
+darkhttpd
+ddrescue
+dhclient
+dhcpcd
+diffutils
+dmraid
+dnsmasq
+dosfstools
+edk2-shell
+efibootmgr
+espeakup
+ethtool
+exfatprogs
+f2fs-tools
+fatresize
+fsarchiver
+gnu-netcat
+gpart
+gpm
+gptfdisk
+grml-zsh-config
+haveged
+hdparm
+intel-ucode
+ipw2100-fw
+ipw2200-fw
+irssi
+iwd
+jfsutils
+kitty-terminfo
+lftp
+linux
+linux-atm
+linux-firmware
+livecd-sounds
+lsscsi
+lvm2
+lynx
+man-db
+man-pages
+mc
+mdadm
+memtest86+
+mkinitcpio
+mkinitcpio-archiso
+mkinitcpio-nfs-utils
+mtools
+nano
+nbd
+ndisc6
+nfs-utils
+nilfs-utils
+nmap
+ntfs-3g
+nvme-cli
+openconnect
+openssh
+openvpn
+partclone
+parted
+partimage
+ppp
+pptpclient
+reflector
+reiserfsprogs
+rp-pppoe
+rsync
+rxvt-unicode-terminfo
+sdparm
+sg3_utils
+smartmontools
+squashfs-tools
+sudo
+syslinux
+systemd-resolvconf
+tcpdump
+terminus-font
+termite-terminfo
+testdisk
+tmux
+udftools
+usb_modeswitch
+usbutils
+vim
+vpnc
+wireless-regdb
+wireless_tools
+wpa_supplicant
+wvdial
+xfsprogs
+xl2tpd
+zsh
+
+#Carli
+sddm
+deepin
+deepin-extra
+bash-completion
+
+#Calamares
+calamares
+carli-calamares-config
+grub
+
+#Software
+git
+base-devel
+yay-bin
+neofetch

packages-gnome.x86_64

@@ -0,0 +1,124 @@
+#
+# SPDX-License-Identifier: GPL-3.0-or-later
+alsa-utils
+amd-ucode
+arch-install-scripts
+b43-fwcutter
+base
+bind-tools
+brltty
+broadcom-wl
+btrfs-progs
+clonezilla
+crda
+darkhttpd
+ddrescue
+dhclient
+dhcpcd
+diffutils
+dmraid
+dnsmasq
+dosfstools
+edk2-shell
+efibootmgr
+espeakup
+ethtool
+exfatprogs
+f2fs-tools
+fatresize
+fsarchiver
+gnu-netcat
+gpart
+gpm
+gptfdisk
+grml-zsh-config
+haveged
+hdparm
+intel-ucode
+ipw2100-fw
+ipw2200-fw
+irssi
+iwd
+jfsutils
+kitty-terminfo
+lftp
+linux
+linux-atm
+linux-firmware
+livecd-sounds
+lsscsi
+lvm2
+lynx
+man-db
+man-pages
+mc
+mdadm
+memtest86+
+mkinitcpio
+mkinitcpio-archiso
+mkinitcpio-nfs-utils
+mtools
+nano
+nbd
+ndisc6
+nfs-utils
+nilfs-utils
+nmap
+ntfs-3g
+nvme-cli
+openconnect
+openssh
+openvpn
+partclone
+parted
+partimage
+ppp
+pptpclient
+reflector
+reiserfsprogs
+rp-pppoe
+rsync
+rxvt-unicode-terminfo
+sdparm
+sg3_utils
+smartmontools
+squashfs-tools
+sudo
+syslinux
+systemd-resolvconf
+tcpdump
+terminus-font
+termite-terminfo
+testdisk
+tmux
+udftools
+usb_modeswitch
+usbutils
+vim
+vpnc
+wireless-regdb
+wireless_tools
+wpa_supplicant
+wvdial
+xfsprogs
+xl2tpd
+zsh
+
+#Carli
+sddm
+gnome
+dconf-editor
+gnome-tweaks
+guake
+bash-completion
+
+#Calamares
+calamares
+carli-calamares-config
+grub
+
+#Software
+git
+base-devel
+yay-bin
+neofetch

packages-mate.x86_64

@@ -0,0 +1,122 @@
+#
+# SPDX-License-Identifier: GPL-3.0-or-later
+alsa-utils
+amd-ucode
+arch-install-scripts
+b43-fwcutter
+base
+bind-tools
+brltty
+broadcom-wl
+btrfs-progs
+clonezilla
+crda
+darkhttpd
+ddrescue
+dhclient
+dhcpcd
+diffutils
+dmraid
+dnsmasq
+dosfstools
+edk2-shell
+efibootmgr
+espeakup
+ethtool
+exfatprogs
+f2fs-tools
+fatresize
+fsarchiver
+gnu-netcat
+gpart
+gpm
+gptfdisk
+grml-zsh-config
+haveged
+hdparm
+intel-ucode
+ipw2100-fw
+ipw2200-fw
+irssi
+iwd
+jfsutils
+kitty-terminfo
+lftp
+linux
+linux-atm
+linux-firmware
+livecd-sounds
+lsscsi
+lvm2
+lynx
+man-db
+man-pages
+mc
+mdadm
+memtest86+
+mkinitcpio
+mkinitcpio-archiso
+mkinitcpio-nfs-utils
+mtools
+nano
+nbd
+ndisc6
+nfs-utils
+nilfs-utils
+nmap
+ntfs-3g
+nvme-cli
+openconnect
+openssh
+openvpn
+partclone
+parted
+partimage
+ppp
+pptpclient
+reflector
+reiserfsprogs
+rp-pppoe
+rsync
+rxvt-unicode-terminfo
+sdparm
+sg3_utils
+smartmontools
+squashfs-tools
+sudo
+syslinux
+systemd-resolvconf
+tcpdump
+terminus-font
+termite-terminfo
+testdisk
+tmux
+udftools
+usb_modeswitch
+usbutils
+vim
+vpnc
+wireless-regdb
+wireless_tools
+wpa_supplicant
+wvdial
+xfsprogs
+xl2tpd
+zsh
+
+#Carli
+sddm
+mate
+mate-extra
+bash-completion
+
+#Calamares
+calamares
+carli-calamares-config
+grub
+
+#Software
+git
+base-devel
+yay-bin
+neofetch

packages-plasma.x86_64

@@ -0,0 +1,131 @@
+#
+# SPDX-License-Identifier: GPL-3.0-or-later
+alsa-utils
+amd-ucode
+arch-install-scripts
+b43-fwcutter
+base
+bind-tools
+brltty
+broadcom-wl
+btrfs-progs
+clonezilla
+crda
+darkhttpd
+ddrescue
+dhclient
+dhcpcd
+diffutils
+dmraid
+dnsmasq
+dosfstools
+edk2-shell
+efibootmgr
+espeakup
+ethtool
+exfatprogs
+f2fs-tools
+fatresize
+fsarchiver
+gnu-netcat
+gpart
+gpm
+gptfdisk
+grml-zsh-config
+haveged
+hdparm
+intel-ucode
+ipw2100-fw
+ipw2200-fw
+irssi
+iwd
+jfsutils
+kitty-terminfo
+lftp
+linux
+linux-atm
+linux-firmware
+livecd-sounds
+lsscsi
+lvm2
+lynx
+man-db
+man-pages
+mc
+mdadm
+memtest86+
+mkinitcpio
+mkinitcpio-archiso
+mkinitcpio-nfs-utils
+mtools
+nano
+nbd
+ndisc6
+nfs-utils
+nilfs-utils
+nmap
+ntfs-3g
+nvme-cli
+openconnect
+openssh
+openvpn
+partclone
+parted
+partimage
+ppp
+pptpclient
+reflector
+reiserfsprogs
+rp-pppoe
+rsync
+rxvt-unicode-terminfo
+sdparm
+sg3_utils
+smartmontools
+squashfs-tools
+sudo
+syslinux
+systemd-resolvconf
+tcpdump
+terminus-font
+termite-terminfo
+testdisk
+tmux
+udftools
+usb_modeswitch
+usbutils
+vim
+vpnc
+wireless-regdb
+wireless_tools
+wpa_supplicant
+wvdial
+xfsprogs
+xl2tpd
+zsh
+
+#Carli
+plasma-meta
+#kde-applications-meta
+packagekit-qt5
+sddm
+bash-completion
+partitionmanager
+
+#Calamares
+calamares
+carli-calamares-config
+carli-system-installation
+grub
+
+#carli
+carli-keyring
+
+#Software
+git
+base-devel
+yay-bin
+neofetch
+dolphin
+konsole
+kate

packages-xfce4.x86_64

@@ -0,0 +1,126 @@
+#
+# SPDX-License-Identifier: GPL-3.0-or-later
+alsa-utils
+amd-ucode
+arch-install-scripts
+b43-fwcutter
+base
+bind-tools
+brltty
+broadcom-wl
+btrfs-progs
+clonezilla
+crda
+darkhttpd
+ddrescue
+dhclient
+dhcpcd
+diffutils
+dmraid
+dnsmasq
+dosfstools
+edk2-shell
+efibootmgr
+espeakup
+ethtool
+exfatprogs
+f2fs-tools
+fatresize
+fsarchiver
+gnu-netcat
+gpart
+gpm
+gptfdisk
+grml-zsh-config
+haveged
+hdparm
+intel-ucode
+ipw2100-fw
+ipw2200-fw
+irssi
+iwd
+jfsutils
+kitty-terminfo
+lftp
+linux
+linux-atm
+linux-firmware
+livecd-sounds
+lsscsi
+lvm2
+lynx
+man-db
+man-pages
+mc
+mdadm
+memtest86+
+mkinitcpio
+mkinitcpio-archiso
+mkinitcpio-nfs-utils
+mtools
+nano
+nbd
+ndisc6
+nfs-utils
+nilfs-utils
+nmap
+ntfs-3g
+nvme-cli
+openconnect
+openssh
+openvpn
+partclone
+parted
+partimage
+ppp
+pptpclient
+reflector
+reiserfsprogs
+rp-pppoe
+rsync
+rxvt-unicode-terminfo
+sdparm
+sg3_utils
+smartmontools
+squashfs-tools
+sudo
+syslinux
+systemd-resolvconf
+tcpdump
+terminus-font
+termite-terminfo
+testdisk
+tmux
+udftools
+usb_modeswitch
+usbutils
+vim
+vpnc
+wireless-regdb
+wireless_tools
+wpa_supplicant
+wvdial
+xfsprogs
+xl2tpd
+zsh
+
+#Carli
+sddm
+xfce4
+xfce4-goodies
+bash-completion
+
+#Calamares
+calamares
+carli-calamares-config
+carli-system-installation
+grub
+
+#carli
+carli-keyring
+
+#Software
+git
+base-devel
+yay-bin
+neofetch

packages.x86_64

@@ -0,0 +1,132 @@
+#
+# SPDX-License-Identifier: GPL-3.0-or-later
+alsa-utils
+amd-ucode
+arch-install-scripts
+b43-fwcutter
+base
+bind-tools
+brltty
+broadcom-wl
+btrfs-progs
+clonezilla
+crda
+darkhttpd
+ddrescue
+dhclient
+dhcpcd
+diffutils
+dmraid
+dnsmasq
+dosfstools
+edk2-shell
+efibootmgr
+espeakup
+ethtool
+exfatprogs
+f2fs-tools
+fatresize
+fsarchiver
+gnu-netcat
+gpart
+gpm
+gptfdisk
+grml-zsh-config
+haveged
+hdparm
+intel-ucode
+ipw2100-fw
+ipw2200-fw
+irssi
+iwd
+jfsutils
+kitty-terminfo
+lftp
+linux
+linux-atm
+linux-firmware
+livecd-sounds
+lsscsi
+lvm2
+lynx
+man-db
+man-pages
+mc
+mdadm
+memtest86+
+mkinitcpio
+mkinitcpio-archiso
+mkinitcpio-nfs-utils
+mtools
+nano
+nbd
+ndisc6
+nfs-utils
+nilfs-utils
+nmap
+ntfs-3g
+nvme-cli
+openconnect
+openssh
+openvpn
+partclone
+parted
+partimage
+ppp
+pptpclient
+reflector
+reiserfsprogs
+rp-pppoe
+rsync
+rxvt-unicode-terminfo
+sdparm
+sg3_utils
+smartmontools
+squashfs-tools
+sudo
+syslinux
+systemd-resolvconf
+tcpdump
+terminus-font
+termite-terminfo
+testdisk
+tmux
+udftools
+usb_modeswitch
+usbutils
+vim
+vpnc
+wireless-regdb
+wireless_tools
+wpa_supplicant
+wvdial
+xfsprogs
+xl2tpd
+zsh
+
+#Carli
+plasma-meta
+#kde-applications-meta
+packagekit-qt5
+sddm
+bash-completion
+partitionmanager
+
+#Calamares
+calamares
+carli-calamares-config
+carli-system-installation
+grub
+os-prober
+
+#carli
+carli-keyring
+
+#Software
+git
+base-devel
+yay-bin
+neofetch
+dolphin
+konsole
+kate

pacman.conf

@@ -0,0 +1,106 @@
+#
+# /etc/pacman.conf
+#
+# See the pacman.conf(5) manpage for option and repository directives
+#
+# SPDX-License-Identifier: GPL-3.0-or-later
+
+#
+# GENERAL OPTIONS
+#
+[options]
+# The following paths are commented out with their default values listed.
+# If you wish to use different paths, uncomment and update the paths.
+#RootDir     = /
+#DBPath      = /var/lib/pacman/
+#CacheDir    = /var/cache/pacman/pkg/
+#LogFile     = /var/log/pacman.log
+#GPGDir      = /etc/pacman.d/gnupg/
+#HookDir     = /etc/pacman.d/hooks/
+HoldPkg     = pacman glibc
+#XferCommand = /usr/bin/curl -L -C - -f -o %o %u
+#XferCommand = /usr/bin/wget --passive-ftp -c -O %o %u
+#CleanMethod = KeepInstalled
+Architecture = auto
+
+# Pacman won't upgrade packages listed in IgnorePkg and members of IgnoreGroup
+#IgnorePkg   =
+#IgnoreGroup =
+
+#NoUpgrade   =
+#NoExtract   =
+
+# Misc options
+#UseSyslog
+#Color
+#TotalDownload
+# We cannot check disk space from within a chroot environment
+#CheckSpace
+#VerbosePkgLists
+
+# By default, pacman accepts packages signed by keys that its local keyring
+# trusts (see pacman-key and its man page), as well as unsigned packages.
+SigLevel    = Required DatabaseOptional
+LocalFileSigLevel = Optional
+#RemoteFileSigLevel = Required
+
+# NOTE: You must run `pacman-key --init` before first using pacman; the local
+# keyring can then be populated with the keys of all official Arch Linux
+# packagers with `pacman-key --populate archlinux`.
+
+#
+# REPOSITORIES
+#   - can be defined here or included from another file
+#   - pacman will search repositories in the order defined here
+#   - local/custom mirrors can be added here or in separate files
+#   - repositories listed first will take precedence when packages
+#     have identical names, regardless of version number
+#   - URLs will have $repo replaced by the name of the current repo
+#   - URLs will have $arch replaced by the name of the architecture
+#
+# Repository entries are of the format:
+#       [repo-name]
+#       Server = ServerName
+#       Include = IncludePath
+#
+# The header [repo-name] is crucial - it must be present and
+# uncommented to enable the repo.
+#
+
+# The testing repositories are disabled by default. To enable, uncomment the
+# repo name header and Include lines. You can add preferred servers immediately
+# after the header, and they will be used before the default mirrors.
+
+#[testing]
+#Include = /etc/pacman.d/mirrorlist
+
+[core]
+Include = /etc/pacman.d/mirrorlist
+
+[extra]
+Include = /etc/pacman.d/mirrorlist
+
+#[community-testing]
+#Include = /etc/pacman.d/mirrorlist
+
+[community]
+Include = /etc/pacman.d/mirrorlist
+
+# If you want to run 32 bit applications on your x86_64 system,
+# enable the multilib repositories as required here.
+
+#[multilib-testing]
+#Include = /etc/pacman.d/mirrorlist
+
+#[multilib]
+#Include = /etc/pacman.d/mirrorlist
+
+# An example of a custom package repository.  See the pacman manpage for
+# tips on creating your own repositories.
+#[custom]
+#SigLevel = Optional TrustAll
+#Server = file:///home/custompkgs
+
+[carli_repo]
+SigLevel = Required DatabaseOptional
+Server = https://arcolinuxiso.github.io/$repo/$arch

profiledef.sh

@@ -0,0 +1,22 @@
+#!/usr/bin/env bash
+# shellcheck disable=SC2034
+
+iso_name="carli"
+iso_label="carli_$(date +%Y%m)"
+iso_publisher="Carli Linux <https://www.arcolinuxiso.com>"
+iso_application="Carli Linux Live/Rescue CD"
+iso_version="$(date +%Y.%m.%d)"
+install_dir="arch"
+bootmodes=('bios.syslinux.mbr' 'bios.syslinux.eltorito' 'uefi-x64.systemd-boot.esp' 'uefi-x64.systemd-boot.eltorito')
+arch="x86_64"
+pacman_conf="pacman.conf"
+#airootfs_image_tool_options=('-comp' 'xz' '-Xbcj' 'x86' '-b' '1M' '-Xdict-size' '1M')
+airootfs_image_tool_options=('-comp' 'xz')
+file_permissions=(
+  ["/etc/shadow"]="0:0:400"
+  ["/root"]="0:0:750"
+  ["/root/.automated_script.sh"]="0:0:755"
+  ["/usr/local/bin/choose-mirror"]="0:0:755"
+  ["/usr/local/bin/Installation_guide"]="0:0:755"
+  ["/usr/local/bin/livecd-sound"]="0:0:755"
+)

setup-our-git-credentials.sh

@@ -0,0 +1,147 @@
+#!/bin/bash
+#
+##################################################################################################################
+# Written to be used on 64 bits computers
+# Author 	: 	Erik Dubois
+# Website 	: 	http://www.erikdubois.be
+##################################################################################################################
+##################################################################################################################
+#
+#   DO NOT JUST RUN THIS. EXAMINE AND JUDGE. RUN AT YOUR OWN RISK.
+#
+##################################################################################################################
+
+# Problem solving commands
+
+# Read before using it.
+# https://www.atlassian.com/git/tutorials/undoing-changes/git-reset
+# git reset --hard orgin/master
+# ONLY if you are very sure and no coworkers are on your github.
+
+# Command that have helped in the past
+# Force git to overwrite local files on pull - no merge
+# git fetch all
+# git push --set-upstream origin master
+# git reset --hard orgin/master
+
+
+#setting up git
+#https://www.atlassian.com/git/tutorials/setting-up-a-repository/git-config
+
+
+echo
+tput setaf 1
+echo "################################################################"
+echo "#####  Choose wisely - one time setup after clean install   ####"
+echo "################################################################"
+tput sgr0
+echo
+echo "Select the correct desktop"
+echo
+echo "0.  Do nothing"
+echo "1.  Erik"
+echo "2.  Marco"
+echo "3.  Raniel"
+echo "4.  John"
+echo "5.  Steve"
+echo "6.  Brad"
+echo "7.  fake1"
+echo "8.  fake2"
+echo "9.  fake3"
+echo "10. fake4"
+echo "Type the number..."
+
+read CHOICE
+
+case $CHOICE in
+
+    0 )
+      echo
+      echo "########################################"
+      echo "We did nothing as per your request"
+      echo "########################################"
+      echo
+      ;;
+
+    1 )
+			git config --global pull.rebase false
+			git config --global push.default simple
+			git config --global user.name "Erik Dubois"
+			git config --global user.email "erik.dubois@gmail.com"
+			sudo git config --system core.editor nano
+			git config --global credential.helper cache
+			git config --global credential.helper 'cache --timeout=32000'
+      ;;
+    2 )
+			git config --global pull.rebase false
+			git config --global push.default simple
+			git config --global user.name "Marco Obaid"
+			git config --global user.email "marco.obaid@gmail.com"
+			sudo git config --system core.editor nano
+			git config --global credential.helper cache
+			git config --global credential.helper 'cache --timeout=32000'
+      ;;
+    3 )
+			git config --global pull.rebase false
+			git config --global push.default simple
+			git config --global user.name "Raniel Laguna"
+			git config --global user.email "avraniel@gmail.com"
+			sudo git config --system core.editor nano
+			git config --global credential.helper cache
+			git config --global credential.helper 'cache --timeout=32000'
+      ;;
+    4 )
+			git config --global pull.rebase false
+			git config --global push.default simple
+			git config --global user.name "John Blevins"
+			git config --global user.email "samurailostinjapan@gmail.com"
+			sudo git config --system core.editor nano
+			git config --global credential.helper cache
+			git config --global credential.helper 'cache --timeout=32000'
+      ;;
+    5 )
+			git config --global pull.rebase false
+			git config --global push.default simple
+			git config --global user.name "Steve Younger"
+			git config --global user.email "coritanie@gmail.com"
+			sudo git config --system core.editor nano
+			git config --global credential.helper cache
+			git config --global credential.helper 'cache --timeout=32000'
+      ;;
+    6 )
+			git config --global pull.rebase false
+			git config --global push.default simple
+			git config --global user.name "Brad Heffernan"
+			git config --global user.email "ph3onix83@gmail.com"
+			sudo git config --system core.editor nano
+			git config --global credential.helper cache
+			git config --global credential.helper 'cache --timeout=32000'
+      ;;
+    7 )
+      echo
+      ;;
+    8 )
+      echo
+      ;;
+    9 )
+      echo
+      ;;
+    10 )
+      echo
+      ;;
+    * )
+      echo "#################################"
+      echo "Choose the correct number"
+      echo "#################################"
+      ;;
+esac
+
+echo "###########################################################"
+echo "Github credentials have been set"
+echo "Delete the ~/.cache/git folder if you made a mistake or"
+echo "if you want to switch to your personal github"
+echo "###########################################################"
+
+echo "################################################################"
+echo "###################    T H E   E N D      ######################"
+echo "################################################################"

syslinux/archiso_head.cfg

@@ -0,0 +1,31 @@
+#
+# SPDX-License-Identifier: GPL-3.0-or-later
+
+SERIAL 0 38400
+UI vesamenu.c32
+MENU TITLE Carli Linux
+MENU BACKGROUND splash.png
+
+MENU WIDTH 78
+MENU MARGIN 4
+MENU ROWS 7
+MENU VSHIFT 10
+MENU TABMSGROW 14
+MENU CMDLINEROW 14
+MENU HELPMSGROW 16
+MENU HELPMSGENDROW 29
+
+# Refer to http://syslinux.zytor.com/wiki/index.php/Doc/menu
+
+MENU COLOR border       30;44   #40ffffff #a0000000 std
+MENU COLOR title        1;36;44 #9033ccff #a0000000 std
+MENU COLOR sel          7;37;40 #e0ffffff #20ffffff all
+MENU COLOR unsel        37;44   #50ffffff #a0000000 std
+MENU COLOR help         37;40   #c0ffffff #a0000000 std
+MENU COLOR timeout_msg  37;40   #80ffffff #00000000 std
+MENU COLOR timeout      1;37;40 #c0ffffff #00000000 std
+MENU COLOR msg07        37;40   #90ffffff #a0000000 std
+MENU COLOR tabmsg       31;40   #30ffffff #00000000 std
+
+MENU CLEAR
+MENU IMMEDIATE

syslinux/archiso_pxe-linux.cfg

@@ -0,0 +1,35 @@
+#
+# SPDX-License-Identifier: GPL-3.0-or-later
+
+LABEL arch64_nbd
+TEXT HELP
+Boot the Carli Linux install medium using NBD.
+It allows you to install Carli Linux or perform system maintenance.
+ENDTEXT
+MENU LABEL Carli Linux install medium (x86_64, NBD)
+LINUX /%INSTALL_DIR%/boot/x86_64/vmlinuz-linux
+INITRD /%INSTALL_DIR%/boot/intel-ucode.img,/%INSTALL_DIR%/boot/amd-ucode.img,/%INSTALL_DIR%/boot/x86_64/initramfs-linux.img
+APPEND archisobasedir=%INSTALL_DIR% archisolabel=%ARCHISO_LABEL% archiso_nbd_srv=${pxeserver} checksum verify
+SYSAPPEND 3
+
+LABEL arch64_nfs
+TEXT HELP
+Boot the Carli Linux live medium using NFS.
+It allows you to install Carli Linux or perform system maintenance.
+ENDTEXT
+MENU LABEL Carli Linux install medium (x86_64, NFS)
+LINUX /%INSTALL_DIR%/boot/x86_64/vmlinuz-linux
+INITRD /%INSTALL_DIR%/boot/intel-ucode.img,/%INSTALL_DIR%/boot/amd-ucode.img,/%INSTALL_DIR%/boot/x86_64/initramfs-linux.img
+APPEND archisobasedir=%INSTALL_DIR% archiso_nfs_srv=${pxeserver}:/run/archiso/bootmnt checksum verify
+SYSAPPEND 3
+
+LABEL arch64_http
+TEXT HELP
+Boot the Carli Linux live medium using HTTP.
+It allows you to install Carli Linux or perform system maintenance.
+ENDTEXT
+MENU LABEL Carli Linux install medium (x86_64, HTTP)
+LINUX /%INSTALL_DIR%/boot/x86_64/vmlinuz-linux
+INITRD /%INSTALL_DIR%/boot/intel-ucode.img,/%INSTALL_DIR%/boot/amd-ucode.img,/%INSTALL_DIR%/boot/x86_64/initramfs-linux.img
+APPEND archisobasedir=%INSTALL_DIR% archiso_http_srv=http://${pxeserver}/ checksum verify
+SYSAPPEND 3

syslinux/archiso_pxe.cfg

@@ -0,0 +1,8 @@
+#
+# SPDX-License-Identifier: GPL-3.0-or-later
+
+INCLUDE archiso_head.cfg
+
+INCLUDE archiso_pxe-linux.cfg
+
+INCLUDE archiso_tail.cfg

syslinux/archiso_sys-linux.cfg

@@ -0,0 +1,23 @@
+#
+# SPDX-License-Identifier: GPL-3.0-or-later
+
+LABEL arch64
+TEXT HELP
+Boot the Carli Linux install medium on BIOS.
+It allows you to install Carli Linux or perform system maintenance.
+ENDTEXT
+MENU LABEL Carli Linux install medium (x86_64, BIOS)
+LINUX /%INSTALL_DIR%/boot/x86_64/vmlinuz-linux
+INITRD /%INSTALL_DIR%/boot/intel-ucode.img,/%INSTALL_DIR%/boot/amd-ucode.img,/%INSTALL_DIR%/boot/x86_64/initramfs-linux.img
+APPEND archisobasedir=%INSTALL_DIR% archisolabel=%ARCHISO_LABEL%
+
+# Accessibility boot option
+LABEL arch64speech
+TEXT HELP
+Boot the Carli Linux install medium on BIOS with speakup screen reader.
+It allows you to install Carli Linux or perform system maintenance with speech feedback.
+ENDTEXT
+MENU LABEL Carli Linux install medium (x86_64, BIOS) with ^speech
+LINUX /%INSTALL_DIR%/boot/x86_64/vmlinuz-linux
+INITRD /%INSTALL_DIR%/boot/intel-ucode.img,/%INSTALL_DIR%/boot/amd-ucode.img,/%INSTALL_DIR%/boot/x86_64/initramfs-linux.img
+APPEND archisobasedir=%INSTALL_DIR% archisolabel=%ARCHISO_LABEL% accessibility=on

syslinux/archiso_sys.cfg

@@ -0,0 +1,11 @@
+#
+# SPDX-License-Identifier: GPL-3.0-or-later
+
+INCLUDE archiso_head.cfg
+
+DEFAULT arch64
+TIMEOUT 150
+
+INCLUDE archiso_sys-linux.cfg
+
+INCLUDE archiso_tail.cfg

syslinux/archiso_tail.cfg

@@ -0,0 +1,38 @@
+#
+# SPDX-License-Identifier: GPL-3.0-or-later
+
+LABEL existing
+TEXT HELP
+Boot an existing operating system.
+Press TAB to edit the disk and partition number to boot.
+ENDTEXT
+MENU LABEL Boot existing OS
+COM32 chain.c32
+APPEND hd0 0
+
+# http://www.memtest.org/
+LABEL memtest
+MENU LABEL Run Memtest86+ (RAM test)
+LINUX /%INSTALL_DIR%/boot/memtest
+
+# http://hdt-project.org/
+LABEL hdt
+MENU LABEL Hardware Information (HDT)
+COM32 hdt.c32
+APPEND modules_alias=hdt/modalias.gz pciids=hdt/pciids.gz
+
+LABEL reboot
+TEXT HELP
+Reboot computer.
+The computer's firmware must support APM.
+ENDTEXT
+MENU LABEL Reboot
+COM32 reboot.c32
+
+LABEL poweroff
+TEXT HELP
+Power off computer.
+The computer's firmware must support APM.
+ENDTEXT
+MENU LABEL Power Off
+COM32 poweroff.c32

syslinux/syslinux.cfg

@@ -0,0 +1,14 @@
+#
+# SPDX-License-Identifier: GPL-3.0-or-later
+
+DEFAULT select
+
+LABEL select
+COM32 whichsys.c32
+APPEND -pxe- pxe -sys- sys -iso- sys
+
+LABEL pxe
+CONFIG archiso_pxe.cfg
+
+LABEL sys
+CONFIG archiso_sys.cfg